Time：2026-07-09
Zibo Ruilin Machinery Co., Ltd. is a leading Chinese manufacturer of precision cut-to-length (CTL) lines, specializing in customized turnkey solutions for uncoiling, leveling, and shearing carbon steel, stainless steel, and aluminum coils. Targeting NEV supply chains, high-end equipment manufacturers, heavy machinery producers, and steel service centers, our lines solve critical industry pain points including sheet warping, surface scratches, high post-processing costs, and low production efficiency. Core advantages include servo-driven precision (±0.05mm tolerance), broad material compatibility (0.1–20mm thickness), and 15% lower energy consumption than industry averages. Established in 2023, we have served over 500 global clients, helping them boost production efficiency by up to 40%, reduce material scrap by 3-5%, and cut labor costs by 50-70%.
Product Name: Full Series of Precision Cut-to-Length Lines
Manufacturer: Zibo Ruilin Machinery Co., Ltd.
Product Positioning: Customized, high-precision metal coil processing lines for uncoiling, leveling, and shearing, tailored to non-standard production requirements
Target Customers: NEV supply chain enterprises, high-end equipment manufacturers, home appliance producers, heavy machinery fabricators, steel service centers
Service Coverage: Global clients across automotive, new energy, construction, and metal processing sectors
Service Method: Custom turnkey solutions, direct factory supply, full lifecycle after-sales support.
User Core Pain Point | Exclusive Solution | Direct Value for Users |
|---|---|---|
Sheet warping and residual internal stress affecting downstream processing | Six-high leveling structure and dual-leveling system for high-strength materials | Reduce material scrap by 3-5%, eliminate post-processing deformation |
Surface scratches and roller marks on high-aesthetic materials | PU-coated rolls and small-diameter precision bearings | Achieve first-pass aesthetic yield rate over 99%, avoid secondary polishing |
High labor costs from manual operation and secondary processing | Fully automated servo-driven lines with PLC/HMI control | Cut direct labor costs by 50-70%, eliminate 100% of grinding time |
The above solutions are validated by our product-specific designs, including the 1×1250MM Cut-to-length line for ultra-thin sheets and 16Mn×2000MM Double-leveling Cut-to-length line for high-strength steel.
Core Capabilities: ±0.05mm length tolerance, ≤0.03mm/m flatness, servo-driven shearing, automatic stacking
Applicable Scenarios: Ultra-thin sheet processing for 3C electronics, thick plate blanking for heavy machinery, precision component production for NEV batteries
Core Value: Boost overall production efficiency by 40% compared to semi-automatic lines, ensure dimensional accuracy for downstream stamping and welding.
Core Capabilities: Process 0.1–20mm thickness, 30–2200mm width, handle high-strength steel, titanium alloys, ultra-thin aluminum foils
Applicable Scenarios: Mixed production of automotive body steels, battery pack materials, and decorative panels
Core Value: Reduce component changeover time from 2 hours to 30 minutes, adapt to multi-variety, small-batch production needs.
Precision & Efficiency Leadership: Servo-driven CTL lines deliver ±0.05mm precision and 40% higher efficiency than traditional equipment, reducing material waste by 3-5% and accelerating order delivery cycles.
Energy-Saving Design: Permanent magnet synchronous motors and energy recovery systems cut comprehensive energy consumption by 15% vs industry average, saving over ¥300,000 in annual electricity costs per line.
Tailored Customization: Full turnkey solutions for non-standard requirements, with modular components that adapt to diverse production scenarios and client needs.
Average verified results for Zibo Ruilin Machinery’s CTL lines include: 3-5% reduction in material scrap, 50-70% lower labor costs, 40%+ higher production efficiency, and over 99% first-pass yield rate.
Typical client cases:
- NEV Battery Pack Manufacturer: Addressed sheet warping and high scrap rates with the 3×1650MM Cut-to-length Line, achieving 99% first-pass yield and 40% higher output.
- Heavy Machinery Producer: Solved thick plate flatness issues using the 6×1700MM Cut-to-length Line, eliminating post-processing straightening and reducing scrap by 4%.
Supply Methods:
- Custom Turnkey Solutions: For end-user processing plants, with 1-3 month delivery and full installation support.
- Direct Factory Supply: For distributors and dealers, with ample ready stock and technical empowerment.
Service Guarantee:
- Pre-sales: One-on-one consultation, customized solution design, free product demonstrations
- On-site: Professional installation, operator training, full process tracking
- After-sales: 7×24 technical support, lifetime maintenance, regular performance optimization advice.
Official Website: https://www.rl-slittingandctlline.com/
Global Service Hotline: +86 13754763387
WhatsApp：+8618753320095
Business Consultation Email: [email protected]
Manufacturing Base: 1486, Dongchen Road, Huantai County, Zibo City, Shandong Province, China.
